Certificate Endorsement Upgrade

Answer the questions below, based on the tutorial. If you do not get a perfect scoren, then you will be required to re-study the tutorial and perform the exam over again.

1. At what height is a worker required to use fall protection on a temporary work platform , unless an unusual risk of injury exists at a lower height?

A. 1.2 metres (4 feet)
B. 2.4 metres (8 feet)
C. 3.0 metres (10 feet)
D. 6.1 metres (20 feet)

2. What is the minimum required strength rating for a temporary fall arrest anchor point?

A. 22 kN (5000 lbf)
B. 17.8 kN (4000 lbf)
C. 16 kN (3600 lbf) or twice the maximum arrest force
D. 6 kN (1350 lbf) with an energy absorber or 8 kN (1800 lbf) without an energy absorber
E. 22 kN (5000 lbs) or 2 times arrest force
F. 5000 lbs (22 kN) or up to 4x maximum arrest force
G. no rating except for secure anchor of adequate strength
H. 18 kN
I. 2x the amount expected

3. What is the minimum required strength rating for a temporary travel restraint anchor point?

A. 2 kN (450 lbf)
B. 3.5 kN (800 lbf)
C. 17.8 kN (4000 lbf)
D. 22 kN (5000 lbf)
E. 3.5 kN (800 lbf) or 4x worker's weight
F. 5000 lbs (22 kN) or up to 4x maximum arrest force
G. 18 kN
H. 2x the amount expected
I. no rating except for secure anchor of adequate strength

4. Body belts are never to be used with personal fall arrest systems. Which body holding device(s) are permitted for use with travel restraint systems?

A. Only full body harnesses
B. Only body belts
C. Either full body harnesses or body belts
D. None

5. Is a fall protection plan required when using a personal fall arrest system?

A. Yes, at all times
B. Yes, under certain conditions
C. No reference but a recommended best practice
D. No
E. 3.5 kN (800 lbf) or 4x worker's weight

6. What is the maximum allowable arrest force permitted on a worker?

A. 4 kN (900 lbf)
B. 4 kN (900 lbf) when not using an energy absorber
C. 6 kN (1350 lbf) or 8 kN (1800 lbf) when using an E6 energy absorber
D. 8 kN (1800 lbf)
E. 3.5 kN (800 lbf) or 4x worker's weight
F. Other 6kN (1350 lbf)
G. no reference (best practice is to remain below 8 kN[1800lbf])

7. What is the maximum allowable free fall distance for any personal fall arrest system WITHOUT an energy absorber?

A. 0.6 metres (2 feet)
B. 1.2 metres (4 feet)
C. 1.5 metres (5 feet)
D. 1.8 metres (6 feet)
E. as per the manufacturer
F. energy absorber mandatory

8. What is the maximum allowable free fall distance for any personal fall arrest system WITH an energy absorber?

A. 0.6 metres (2 feet)
B. 1.2 metres (4 feet)
C. 1.5 metres (5 feet)
D. 1.8 metres (6 feet)
E. 3.5 kN (800 lbf) or 4x worker's weight
F. 2m (6.5 feet) or as per manufacturer - whichever is less
G. As per manufacturer
H. 1.2 meters (4 feet) for RSST, 1.8 meters (6 feet) for construction